|
| Forge Motorsport |
 |
Octavia 1.8T + Audi TT 180 Turbo Intake Pipe
As the original developers, engineers and enthusiasts who brought the VAG induction hose line to the market almost 3 years ago, Forge Motorsport is pleased to announce a completely retooled, redesigned, and reengineered range of induction hoses for all VAG 1.8T applications.
We have spent the last year co-developing a range of vehicle specific hoses with silicone manufacturer SiliconHoses.com guaranteed to rival the best offerings from any other manufacturer on the market today in terms of quality, price, and most importantly, performance.
The silicone compound used in the construction of the hoses is of the highest sheer strength available and is hand-laid with a polyester reinforcement fabric. The layering of the hoses is far more uniform and consistent than of that from any other manufacturer which improves the overall structural integrity of the hoses up to 50%.
The internal surface of the hose is completely smooth and unobstructed and the internal volume of this hose has been increased to provide the highest level of airflow at all points within the power band.
We have also taken extra care to ensure consistency between each hose produced and that each hose includes all of the necessary ports and provisions required for each engine code and application as have often times been missing on hoses from other manufacturers.
Each Forge Motorsport Induction Hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for.
Dyno testing has been performed, by independent reviewer and Forge dealer NGP Racing on their in-house DynoJet dynamometer. Testing was performed on a 2003 Jetta 1.8T with an AWP engine code. The vehicle modifcations include Cold Air Intake, 2.5" Turbo-Back Exhaust, Forge 004 Blow-off Valve, N75J Valve. For the benefit of those without engine software modifications testing was conducted with stock ECU software.
Dyno runs 1 and 3 compare a baseline (OEM hose) to the addition of the Forge induction hose using the stock ECU as programming.
Silicone Induction Hose for the VAG 210 / 225hp engines
After encountering the collapse of the OEM intake air hose on the Audi S3 (210 & 225) and TT 225 engines (this typically occurs around 5000rpm) that had been re-chipped, our development team set about the manufacture of a hose with re-inforced walls to remedy the problem. The replacement silicone hose was also aerodynamically improved internally to maximise power by removing the existing restrictions.
 |
Audi TT 180 Coolant Hose Kit
A 7 piece silicone hose kit to replace the coolant hoses on the TT non 225 engine. |
 |
1.8T 210/225 Lower Intercooler Hoses
Second photo shows silicone hoses (3) to replace the lower inter cooler hoses as found on the 210 / 225 1.8T engines with the twin wheel arch mounted intercoolers.
|
 |
1.8T 210/225 Turbo Hose
This hose fits directly to the turbo on the 1.8T 210 and 225 engines. It is made from high temperature resistant flourosilicone compound and nomex reinforced to withstand the high pressures that may be experienced on tuned engines. This is the perfect replacement for the OEM hose which has a history of premature failure.
|
 |
1.8T 210/225 Upper Silicone Boost Hoses
Two silicone boost hoses, turbo to intercooler and intercooler to intake manifold. These are available in a choice of colours and are made to withstand the greater pressures often found on tuned vehicles. These hoses will fit the 210 / 225 versions of the VAG 1.8T engine. |
| Forge Silicon Hoses | Part # |
| Audi |
| TT / S3 210/225hp - 2 Piece Upper Intercooler Hose Kit |
FMKT008 |
| TT / S3 210/225hp - 3 Piece Lower Intercooler Hose Kit |
FMKT007 |
| TT / S3 210/225hp - Induction Hose |
FM225IND |
| TT 180 - 5 Piece Turbo Hose Kit |
FMKT005 |
| 1.8T - 7 Piece Coolant Hose kit |
FMKC005 |
| TT 180 - Induction Hose |
FM180IND |
| A4 1.8T B5 Induction Hose AEB/ATW/AWM/AVJ |
FMA4B5IND |
| A4 1.8T B6 Induction Hose |
FMA4B6IND |
| Skoda |
| Octavia 1.8T 150/180 hp - 5 Piece Intercooler Hose Kit w/ Clamps |
FMKT006 |
| Octavia 1.8T Induction Hose w/ Clamps |
FM180IND |
|
|
Click on a logo to view range
 |
